Electrical Boxes, Covers & Accessories
LV1 is a single gang non-metallic bracket designed for installations on existing construction. The LV1 is used for communications, cable TV or computer wire management. The LV1 adjusts to fit 0.25 in. to 1 in. wall board, paneling or drywall.
- LV1 bracket can be used as template for installation cutout
- Specially designed wing flips up when mounting screw is tightened for a secure mount
- LV1 is listed for use with category 5 cable
- Lv1 is designed to install low-voltage class 2 only
- 10 brackets per box
- Mounting wings hold bracket securely against wall when screws are tightened
- Designed to install low voltage class 2 only
- Dimensions: 5.460 in. x 4.250 in. x 2.500 in. x 1.690 in.
Covers unused 3-1/2 in. and 4 in. round and octagonal boxes prior to the installation of a fan or fixture. The cover is non-rusting, paintable plastic. The cover also comes with white painted screws to blend with the cover. It is also reusable and flexible.
- Deeper cover works with pan boxes without the need to cut the post
- Use #8 screws provided or back out existing screws to accept notched bracket
- Attractive cover, screws don't show on the ceiling
- Covers poorly cut dry wall
- White in color
- Includes: two #8-32 x 3/4 in. flat head screws and bracket
- Dimensions: 0.437 in. x 5.39 in. x 0.812 in.
The Red Dot cover is made of copper-free aluminum that provides increased corrosion resistance. Cover has clean edges provide good gasket sealing. Cover is also 5 in. Dia with 3-1/2 in. Mounting Holes on Center.
- Non-metallic round ceiling box cover is designed to cover ceiling boxes when they are not in use, the cover is made with PVC and is classified for fire wall assemblies, it also meets NEMA OS-2 and is UL listed to help ensure safety
- 3-1/2 in. mounting holes on center
- White in color
- Aluminum
Used for convenience outlets, switch boxes or small junction boxes. Popular for exposed work applications. Surface-mounted wiring requires the wiring to be enclosed with a protective covering such as EMT conduit.
- Drawn construction
- (7) 1/2 in. knockouts
- UL Listed
- 13.0 cu. in. capacity
- Raised ground
- Acceptable in 2-hour fire rated walls
Polycarbonate Round Ceiling Box, Volume 22.5 cu. in. Mounting Means Angled Side Nails, with Molded V-Clamp. High heat-resistant material developed specifically for fixture support applications.
- Volume 22.5 in. cu. in.
- Mounting means angled side nails
- Molded V-clamp
- UL e11461
The 1-Gang 20 cu. in. New Work Ceiling Box with Large Hanger Bar is made of a Polycarbonate material making it durable and long lasting. The box can be used in residential or light commercial applications. Suitable for use with a fixture up to 50 lbs.
- Volume 20 cu. in.
- Suitable for fixture support up to 50 lbs.
- Ground lug
- UL e11461
Made of zinc-die cast for use with the AC, MCI-A and HCF steel and aluminum cables. The Snap-2-it connector has been test been tested and listed by UL in accordance with UL's ground fault requirements. It is safe and fast to install - save about 17-seconds per fitting.
- Snaps onto cable, then into box
- No tools or locknut needed
- Saves time and money
- Cable and connector can be pre-assembled, then entire assembly can be snapped into box
- For use with MC/AC steel and aluminum cable sizes 14/2, 14/3, 14/4, 12/2, 12/3, 12/4, 10/2, 10
- Fits 3.8 in. (trade size) flexible metal conduit, steel and aluminum (regular and reduced wall)
- Trade size: 3/8 in.
- Knockout size: 1/2 in.
- Dimensions: 1.41 in. x 0.85 in. x 0.405 in. x 1.0 in.
- Cable range: 0.405 - 0.612
The Zip Box Blue 4-Gang 55 cu. in. Old Work Non-Metallic Switch and Outlet Box are designed to work with non-metallic sheathed cable in accordance with article 314 of the NEC. Great for light commercial and residential applications, the box is crafted with non-conductive PVC for durability and is fire rated and UL listed to help ensure safety.
- Great for light commercial and residential applications
- Sized for standard devices and switches
- Thermoplastic construction resists rust and won't conduct electricity
- Nail-on bracket design with molded plastic clamp
- Captive nails included
- Die-Cast Construction
- Speed Nipple
- Bulk
- For Rigid Conduit
Carlon 2-Gang 34 cu. in. Black polycarbonate outlet box with angled side nails. POSI-WEDGE cable clamps and POSI-SET feature. Box will not distort or soften in heat and they do not become brittle in the cold.
- Volume 34 cu. in.
- Material phenolic
- Will not distort or soften in heat
- UL E11461
Levels and supports the wiring device where the box is set back from the wall surface. Extends the box up to 1-1/2 in. Allows the contractor to comply with 2014 NEC Article 314.20. The extender works in handy boxes and 4 in. square electrical boxes with plaster rings for single switches or receptacle. Also functions with all standard devices, switches and GFCIs.
- Adjusts up to a 1-1/2 in. box extension
- Functions with all standard devices, switches and GFCI's
- Non-conductive plastic for safer installations
- Neutral color
- Flexible plastic trims easily for multiple gang boxes
- Ideal for installations where wall surface has additional drywall, tile or paneling
- Dimensions: 2.313 in. x 4.188 in. x 1.813 in.
- Use To Reduce The Size Of The Conduit Hole Opening In Steel and Other Metal Enclosures
- Must Use One Inside and One Outside
- For Indoor Use Only
- Use To Reduce The Size Of The Conduit Hole Opening In Steel and Other Metal Enclosures
- Must Use One Inside and One Outside
- For Indoor Use Only
3-Gang Nail-On New Work Outlet Box, Volume 56.5 cu. in. This box is made of PVC. Compound Angled Nails for mounting and 3/8 in. Offset Wallboard Tabs Molded Fast Clamp.
- Volume 56.5 cu. in.
- 3/8 in. offset wallboard tabs molded fast clamp
- Mounting means compound angled nails
- UL E11461