Regulators & Regulator Attachments
These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 and 3/8 tube have a pull test rating of 500 and 750 lbs. respectively. Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.
- 1/4 in. MNPT x male hard nose POL, 7/8 in. nut
- 1/4 in. tube O.D.
- Long nipple
- UL Listed and tested in accordance with UL 569
These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 and 3/8 tube have a pull test rating of 500 and 750 lbs. respectively. Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.
- Male hard nose POL x male hard nose POL, 7/8 in. nut
- 1/4 in. tube O.D.
- Short nipple
- UL Listed and tested in accordance with UL 569
These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.
- Male hard nose pol x male hard nose pol, 7/8 nut
- 1/4 tube OD
- Short nipple
- UL listed and tested in accordance with UL 569
- 20 in. OAL length
- Pull test rating of 500 and 750 lbs. respectively
These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 and 3/8 tube have a pull test rating of 500 and 750 lbs. respectively. Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.
- 1/2 in. MNPT x male hard nose POL, 7/8 in. nut
- 1/4 in. tube O.D.
- Short nipple
- UL Listed and tested in accordance with UL 569
These pigtail and hogtail assemblies come with two brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 in. and 3/8 in. tube have a pull test rating of 500 lbs. and 750 lbs. respectively. 20 in. length.
- Male hard nose POL x male hard nose POL, 7/8 in. nut
- 1/4 in. tube O.D.
- Long nipple
- UL Listed and tested in accordance with UL 569
These pigtail and hog tail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 in. and 3/8 in. tube have a pull test rating of 500 lbs. and 750 lbs. respectively. Different applications require specific pigtail and hog tail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.
- 1/4 in. MNPT x male hard nose POL, 7/8 in. nut
- 1/4 in. tube O.D.
- Short nipple
- UL Listed and tested in accordance with UL 569
These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 and 3/8 tube have a pull test rating of 500 and 750 lbs. respectively. Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.
- Male hard nose POL x male hard nose POL, 7/8 in. nut
- 3/8 in. tube O.D.
- Short nipple
- UL listed and tested in accordance with UL 569
The MEC Flex-Vent regulator kits provides a safe and easy solution to vent LP Gas regulators away from open sources of ignition or other potential fi re hazards. Meets all requirements of the new flexible material allowance in the 2011 NFPA-58, section 5.8.3.1 (3).
- 90 vent angle
- Material: plastic
- With screen
- Accessory/replacement part
These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 and 3/8 tube have a pull test rating of 500 and 750 lbs. respectively. Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.
- Male hard nose POL x male hard nose POL, 1-1/8 in. nut
- 1/4 in. tube O.D.
- Long nipple
- UL Listed and tested in accordance with UL 569
These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 in. and 3/8 in. tube have a pull test rating of 500 lbs. and 750 lbs. respectively. Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.
- Male hard nose POL x male hard nose POL, 7/8 in. nut
- 1/4 in. tube O.D.
- Long nipple
- UL Listed and tested in accordance with UL 569
These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 and 3/8 tube have a pull test rating of 500 and 750 lbs. respectively. Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.
- Male hard nose POL x male hard nose POL, 1-1/8 in. nut
- 1/4 in. tube O.D.
- Long nipple
- UL Listed and tested in accordance with UL 569
These pigtail and hog tail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 in. and 3/8 in. tube have a pull test rating of 500 lbs. and 750 lbs. respectively. Different applications require specific pigtail and hog tail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.
- 1/4 in. MNPT x male hard nose POL, 7/8 in. nut
- 1/4 in. tube O.D.
- Short nipple
- UL Listed and tested in accordance with UL 569
These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 and 3/8 tube have a pull test rating of 500 and 750 lbs. respectively. Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.
- Male hard nose POL x male hard nose POL, 7/8 in. nut
- 1/4 in. tube O.D.
- Long nipple
- UL Listed and tested in accordance with UL 569
ME1600D Series Dielectric pigtails/ hog tails are intended to isolate metallic piping from sources of electrical current and to help prevent galvanic corrosion when used on underground containers. The ME1600D dielectric pigtail/ hogtail would typically be installed at the ASME tank directly upstream of the first stage regulator prior to underground piping, isolating the underground metallic piping from electric current. Long Nipple and 20 in. overall length.
- Male hard nose POL, 7/8 in. nut
- 1/4 in. tube O.D.
- Pull test rating of 500 and 750 lbs. respectively
- UL Listed and tested in accordance with UL 569
ME1600D Series Dielectric pigtails/ hogtails. Intended to isolate metallic piping from sources of electrical current and to help prevent galvanic corrosion when used on underground containers. The ME1600D dielectric pigtail/ hogtail would typically be installed at the ASME tank directly upstream of the first stage regulator prior to underground piping, isolating the underground metallic piping from electric current.
- 1/4 MNPT x Male hard nose POL
- 7/8 in. nut
- Short nipple
- 1/4 tube OD
- POL x 1/4 MPT
- 20 in. length
Intended to isolate metallic piping from sources of electrical current and to help prevent galvanic corrosion when used on underground containers. Dielectric pigtail/ hogtails would typically be installed at the ASME tank directly upstream of the first stage regulator prior to underground piping, isolating the underground metallic piping from electric current. UL LISTED and tested in accordance with UL 569.
- Male hard nose POL x male hard nose POL, 7/8 in. nut
- 1/4 in. tube O.D.
- Short nipple
- UL Listed and tested in accordance with UL 569
- Dielectric protection
- POL x POL
ME1600D Series Dielectric pigtails/ hog tails are intended to isolate metallic piping from sources of electrical current and to help prevent galvanic corrosion when used on underground containers. The ME1600D dielectric pigtail/ hog tail would typically be installed at the ASME tank directly upstream of the first stage regulator prior to underground piping, isolating the underground metallic piping from electric current. These pigtail and hog tail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 and 3/8 tube have a pull test rating of 500 and 750 lbs. respectively.
- Male hard nose pol x male hard nose pol, 7/8 nut
- 3/8 tube O.D
- Short nipple
- UL listed and tested in accordance with UL 569
ME1600D Series Dielectric pigtails/ hogtails are intended to isolate metallic piping from sources of electrical currentand to help prevent galvanic corrosion when used on underground containers. Typically be installed at the ASME tank directly upstream of the first stage regulator prior to underground piping, isolating the underground metallic piping from electric current. These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating.
- Male hard nose pol x male hard nose pol, 7/8 nut
- 1/4 tube OD
- Short nipple
- UL listed and tested in accordance with UL 569
- 20 in. L
- Dielectric protection
- 1/4 and 3/8 tube have a pull test rating of 500 and 750 lbs. respectively
This check valve allows the line to be pressurized and adjusted to the desired pressure through the same valve. NOTE: To help eliminate valve failure, the valve cap should remain on the valve when line is not be pressurized or adjusted. Any dirt, debris, water or other contaminants can potentially jam the valve or compromise the sealing surface causing the valve to leak.
- Connection 1: 1/8 in. MNPT
- Connection 2: 5/16 in. to 32 male
- Thread sealant: yes
- Includes warning tag
The MEC Sentinel Series Full Size Dielectric Inlet Second Stage Regulator features an integral dielectric inlet connection designed to isolate upstream metallic piping from electrical current prior to piping entering a building in compliance with NFPA58 - 2017 section 6.11.316. Since the FNPT inlet serves as the dielectric separation media, any standard MNPT threaded connector or valve can be installed without a separate dielectric union. Both compact and full size models feature the same basic footprint measurement from inlet to outlet.
- Type: second stage
- 3/4 in. x 3/4 in. inlet and outlet
- 1,000,000 BTU capacity
- 11 in. WC outlet set point
- Outlet range: 9-13
These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 and 3/8 tube have a pull test rating of 500 and 750 lbs. respectively. Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.
- Male hard nose pol x male hard nose pol, 7/8 nut
- 3/8 tube O.D
- Short nipple
- UL listed and tested in accordance with UL 569
These pigtail and hogtail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 and 3/8 tube have a pull test rating of 500 and 750 lbs. respectively. Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.
- 1/4 in. MNPT x male hard nose POL, 7/8 in. nut
- 1/4 in. tube O.D.
- Long nipple
- UL Listed and tested in accordance with UL 569
These pigtail and hog tail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 in. and 3/8 in. tube have a pull test rating of 500 lbs. and 750 lbs. respectively. Different applications require specific pigtail and hog tail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.
- 1/4 in. male inverted flare x male hard nose POL, 7/8 in. nut
- 1/4 in. tube O.D.
- Short nipple
- UL Listed and tested in accordance with UL 569
These pigtail and hog tail assemblies come with 2 brass connectors brazed onto a heavy wall annealed copper tube with a 250 psig pressure rating. The 1/4 in. and 3/8 in. tube have a pull test rating of 500 lbs. and 750 lbs. respectively. Different applications require specific pigtail and hog tail assemblies. Special attention is required when ordering to ensure the proper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacement regulator have a new pigtail installed.
- 1/4 in. MNPT x male hard nose POL, 7/8 in. nut
- 1/4 in. tube O.D.
- Long nipple
- UL Listed and tested in accordance with UL 569