Tank Valve Parts
The product is high quality and reliability and durability. The product is easy to use and attractive styling. The product is wide selection of product choices and great value.
- High quality
- Reliability
- Durability
- Attractive styling
1-1/4 in. Acme Gasket. For leak free seal. Durable nitrile rubber material.
- Depth: 0.145
- ID: 0.665
- OD: 0.925
- Material: Duro Nitrile / Buna
- Acme gasket
- Color: black
Forklift tank valve replacement O-ring. Color is black. UL Listed compound for use with propane.
- I.D. 0.612
- 0.818 in. O.D.
- Material: nitrile/Buna
- Replacement part
Replacement Motor Fuel Service Valve Handwheel. Universal design. Manufactured in an ISO Accredited Facility.
- Type: hand wheel only
- Replacement part
- 1.592 in. O.D.
- Material: zinc
- Certified to ANSI / NSF standard 61-9 annex G
- fits 3/4" MEC service valve
1-3/4 in. Acme Gasket. for leak free seal. Durable nitrile rubber material.
- Material: nitrile
- Color: black
- O.D. 1.344
- Id: 0.938
- Depth: 0.125 in.
- Replacement part
Intended to protect both internal and external relief valves ranging in size from 3/4 in. to 1-1/4 in. NPT from moisture and/or other possible contaminants. Using the universal shower cap style relief valve covers will allow technicians to carry 2 sizes that will protect the majority of domestic tank relief valves. Adjustable.
- Material: durable UV stable vinyl
- Fits 3/4 in. to 1-1/4 in. NPT internal and external relief valves
- Color: yellow
- Universal
Replacement Handwheel Screw #10-32. Fits: Marshall Excelsior ME662. Manufactured in an ISO Accredited Facility.
- 3/8 in. OAL
- Certified to ANSI / NSF standard 61-9 annex G
- Replacement for Sherwood 3740-13
- Material: stainless steel
Plastic yellow acme cap for adapter protection. Rated for LP Gas use only. Chain available separately.
- 1-3/4 in. F Acme
- Color: yellow
- Style: pin hole
- Cap only
- LP gas only
- Dust cap
- Minute Man Eye anchors are commonly used for securing small planes, vineyard trellises, storage sheds, tents, orchard and nursery trees, swing sets, clothes lines, fences, retaining walls, radio antennas, small windmills, floating docks, and pet restraint.
- All eye anchors are manufactured from steel that conforms to ASTM A-36 M1020 standards. Holding strength is based on clay soils which are of hard to medium density. The holding strength is reduced in softer less dense soils and sandy soils. To ensure maximum holding strength, anchor must be installed to full depth with the bottom of eyelet at ground level.
- Anchor eyelets are always weld closed, eyelets can be left open upon request of the customer.
MEC BONNET KIT. Fits MES-PVE3329, 3250BC, 2030BC, 2034CLT, 1447C, 1449 series valves. Includes: bonnet assembly, hand wheel and self-tagging screw.
- Use an accurate torque wrench to tighten the bonnet assembly
- Never repair or clean a safety-relief device
- Always destroy a damaged or worn valve and parts so they cannot be reused
- Type: repair kit for bonnet assembly
- An MEC product
- 0.735 OAL
Protective cap for MEC DOT Full Internal pressure relief valves. 3/4 in. size. black color. Extends the life of the valve.
- OAL: 4.375
- Material: UV stable thermoplastic
- Protective cap
- Sold separately
- Fits 3/4 in. internal relief valve
- with lanyard
45 Pipeaway for MEV75FIR. Especially designed for use with DOT Full Internal Pressure Relief Valves. Relieves pressure in excess of the maximum allowable working pressure.
- Material: zinc
- 45 pipe away for MEV75FIR
- Brand: MEC
- 3/4-20 UNEF-2A
- Vent assembly
- MEC part# MEP175-90
- Minute Man Eye anchors are commonly used for securing small planes, vineyard trellises, storage sheds, tents, orchard and nursery trees, swing sets, clothes lines, fences, retaining walls, radio antennas, small windmills, floating docks, and pet restraint.
- All eye anchors are manufactured from steel that conforms to ASTM A-36 M1020 standards. Holding strength is based on clay soils which are of hard to medium density. The holding strength is reduced in softer less dense soils and sandy soils. To ensure maximum holding strength, anchor must be installed to full depth with the bottom of eyelet at ground level.
- Anchor eyelets are always weld closed, eyelets can be left open upon request of the customer.
Universal shower cap style relief valve cover. Intended to protect both internal and external relief valves ranging in size from 1/2 in. to 3/4 in. NPT from moisture and/or other possible contaminants. Will allow technicians to carry two sizes that will protect the majority of domestic tank relief valves.
- Material: durable UV stable vinyl
- Fits 1/2 in. to 3/4 in. NPT internal and external relief valves
- Color: yellow
- Universal
Replacement rain cap. Fits 1-1/4 in. semi-internal valve. Includes lanyard to minimize cap loss.
- Rain/dust cap
- Protects against contamination
- Fits MEC MEVS-UVE453 series
- Color: black
Discharge vent for MEV75FIR. DOT full internal relief valve vent. Designed to discharge gas into the atmosphere to relieve pressures in excess of the maximum allowable working pressure.
- Material: zinc
- 90 angle
- Accessory
- 3/4-20 UNEF-2A
- Vent assembly
- MEC part# MEP175-90
- Minute Man Eye anchors are commonly used for securing small planes, vineyard trellises, storage sheds, tents, orchard and nursery trees, swing sets, clothes lines, fences, retaining walls, radio antennas, small windmills, floating docks, and pet restraint.
- All eye anchors are manufactured from steel that conforms to ASTM A-36 M1020 standards. Holding strength is based on clay soils which are of hard to medium density. The holding strength is reduced in softer less dense soils and sandy soils. To ensure maximum holding strength, anchor must be installed to full depth with the bottom of eyelet at ground level.
- Anchor eyelets are always weld closed, eyelets can be left open upon request of the customer.
Replacement Bonnet Assembly. Fits MES-PVE3250 and MES-2035A Series Vapor Service Valves. Durable brass construction.
- Replacement part
- Type: repair kit
- Bonnet kit
- An MEC product
- Material: brass
- 1.047 OAL
1-1/4 in. F. Acme Cap. Yellow Plastic. Cap only.
- 1-1/4 in. female Acme
- Style: pin hole
- Accessory: MEP147 chain
- Protective plastic cap
- Yellow plastic
- Warning: dust cap only
MEC replacement hand wheel. Fits the following Multi-Service ASME Container Vapor Valves models: MES-PVE3250C, MES-3250CLG, ALG7T, ADT-7, CLM, 1427B, 1447B and 2035A. .375" ID x 2.00" OD. Handwheel only.
- Type: handwheel only
- Aluminum
- Replacement part
- ME9101P5-109 cap screw needed for assembly
- 0.375 in. I.D. x 2.00 in. O.D.
- MEC part
Replacement Handle. Fits ME662, 665, MES-3329, 3250BC, 2034CLT, 1447C and 1449 Series Valves. 2.343 in. OD.
- Aluminum material
- Replacement part
- Type: hand wheel only
- 0.080 lbs.
MEC Self-Cleaning replacement screw for Low Emission vent valves. Designed to minimize loss of product while allowing the operator to effectively bleed down connections and detect liquid levels while filling containers. Vent valves provide an effective means to verify valves have closed in the transfer system when installed into the downstream auxiliary port on the Marshall Excelsior globe and angle valves. Opening the vent valve until liquid or vapor stops venting indicates it is safe to disconnect.
- Reduce emissions by 70% during normal container filling operations
- Self-cleaning
- #54 orifice
- 1/4 in. MNPT connection
- Replacement stem only
- With seal
This hose end reel control cover protects Hannay Hose Reel Control Switches from moisture and/or other contaminants during over-the-road transit. The MEP-GMC1 is specifically designed to fit Hannay Guidemaster control switches while the MEP-RDC1 is specifically designed to fit Hannay red DOT EPS style control switches. Both of these covers fit snuggly over the control to help prevent damage due to moisture or other contaminants thereby increasing the longevity of the control switch.
- Made with durable UV stable black low temperature EPDM material
- Includes security lanyard to help prevent loss of the cap
- Fits hannay guide master and red DOT EPS switches
- Control switch can be operated through cover without removing
The ME655S Ductile Iron Strainer Designed for ow in one direction to guard against debris in pipelines that could cause damage to pumps, valves or other equipment. Can be installed horizontally or vertically. They are available in three stainless steel mesh sizes. The mesh size equals the number of holes per square inch i.e. the smaller the number the larger the holes.
- Blow-off plug size: 1 in.
- Inlet/outlet: 2 in. FNPT
- 40 mesh screen
- Rated 600 psi / WOG