Gas Products
Made of solid brass for strength. For use with any compression fitting. It is not recommended for use with steel tubing.
- Withstand temperatures up to 212 degree F
- No psi if tighten sleeve
- 2-year warranty against defect
- Compression
- Forged brass
- Sleeve
Made of solid brass for strength. For use with any compression fitting. It is not recommended for use with steel tubing.
- Withstand temperatures up to 212 degree F
- No psi if tighten sleeve
- 2-year warranty against defect
- Compression
- Forged brass
- Sleeve
This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.
- Withstand temperatures up to 230 degree F
- Pressure up to 150 psi
- Do not over-tighten
- 2-year warranty against defect
- Lead free
- Brass
Can be used which makes them an economical choice. For use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. Not for underground use.
- Withstand temperatures up to 212 degree F
- Pressure up to 100 psi
- Brass
- 2-year warranty against defect
- Leaded
- Adapter
Typical Application- LP and Natural Gas, flammable liquids, instrumentation, refrigeration, power steering hydraulic and pneumatic systems. Good vibration resistance. Temperature range of -65 degree F to +250 degree F.
- Meets specifications and standards of ASA, ASME, SAE and MS (military standards)
- Use with copper, brass, aluminum and steel hydraulic tubing that can be flared
- Easy to disassemble
- Can be reassembled many times
- Temperature range of -65 degree F to +250 degree F
- Maximum pressure based on 73 degree F working temperature
- Set Includes Autoflare Steel Fitting, Split Rings and Floor/Wall Flange
- #514071 Includes A 1/2" Ball Valve
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Set Includes Autoflare Brass Fitting, Split Rings and Floor/Wall Flange
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Goes Through The Wall To Connect Gas Meter Or Regulator To Tracpipe Line
- Self-Flaring, No Special Tools Needed
- Solid Brass Fitting with Stainless Steel Insert
- Includes Split Ring
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
Marshall Excelsior is the only manufacturer in the industry that offers 3 types of vent valves Low Emission, Self-Cleaning Low Emission, and Standard Vent Valves. All the vent valves below are designed to minimize loss of product while allowing the operator to effectively bleed down connections and detect liquid levels while filling containers. Vent valves provide an effective means to verify valves have closed in the transfer system when installed into the downstream auxiliary port on the Marshall Excelsior globe and angle valves. Opening the vent valve until liquid or vapor stops venting indicates it is safe to disconnect.
- T-handle stem that is non-removable
- Replacement handle only
- Stainless steel
- #54 Orifice
- Includes captures stem
- Rated for LP-Gas and NH3 use
- UL listed
- Set Includes Autoflare Brass Fitting, Split Rings and Floor/Wall Flange
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
- Set Includes Autoflare Steel Fitting, Split Rings and Floor/Wall Flange
- #514071 Includes A 1/2" Ball Valve
*MUST BE INSTALLED BY TRAINED PERSONNEL IN ACCORDANCE WITH NFPA 58 & 54 STATE AND LOCAL CODES
High quality liquid filled pressure gauge. Easily adaptable to industry standard pressure test equipment. Provides a very reliable, inexpensive, permanent way to test both high and low-pressure lines in domestic tank installations.
- 1/4 in. FNPT inlet/1/4 in. MNPT outlet
- 0-300 psig
- Factory installed vent valve
- Reliable method to test high and low pressure tap installations
High Pressure Test Block. Designed to test high pressure lines downstream of the container valve for system leaks. The optional bleeder valve enables the line pressure to be adjusted to the desired test pressure.
- Inlet: male hard nose pol
- Outlet: female pol
- Psig: 0-300
- Factory installed vent valve: yes
This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.
- Withstand temperatures up to 230 degree F
- Pressure up to 150 psi
- Do not over-tighten
- 2-year warranty against defect
- Nipple
- Brass
Chicago Fittings X-Riser Seal and Ferrule Assembly It's our feeling at Chicago Fittings, that Natural Gas and Propane Gas systems should have as few joints as possible, and more importantly, those joints should be located above ground wherever possible. The X-Riser with an integral service head adapter accomplishes both criteria. The use of an X-Riser removes a minimum of (2) below grade joints per riser when compared to that of a standard pigtail style anode-less riser. In addition, those joints, buried below ground are now moved to a single above grade joint eliminating the risks and liabilities associated with below grade joints. With the use of the X-Riser system, gas is distributed from main to meter, meter to appliance, or propane tank to house with a solid (jointless) underground pipe. Combining this philosophy with the long list of features and benefits of the elastic sealing technology makes the X-Riser the most reliable, safest and most cost-effective method for gas piping systems. The typical after-the-meter installation comparing the use of the X-Riser to a traditional prevent pigtail style riser with stab couplings yields a removal of a total of (10) joints and most importantly, eliminates the (4) joints buried below grade. With the X-Riser swivel capabilities we also remove the need for a union and nipple to make the connection above grade.
- No underground joints 1 solid service line from point-to-point with above ground terminations
- No chamfering required eliminates the need for chamfer tools and fusion equipment, a simple clean cut is all that is required
- 1-piece bi-directional seal and built in stiffener - seal assembly can't be installed improperly, eliminates worries of order and orientation of multiple internal components
- No torque requirement all Chicago fittings products incorporate the bottoming or positive stop design, simply tighten the compression nut until it is metal-to-metal and you are done
- IAPMO/UPC/IPC Listed
- Must be installed by trained personnel in accordance with NFPA 58 and 54 state and local codes
This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.
- Withstand temperatures up to 230 degree F
- Pressure up to 150 psi
- Do not over-tighten
- 2-year warranty against defect
- Nipple
- Brass
1/2 in. low pressure manometer adapter. Marshall Excelsior Company Part #ME1328. Used to check for gas leaks.
- Test equipment and gauges
- Female flare: 1/2 in.
- Male flare: 1/2 in.
- Hose barb: 1/2 in.
This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.
- Withstand temperatures up to 230 degree F
- Pressure up to 150 psi
- Do not over-tighten
- 2-year warranty against defect
- Nipple
- Brass
This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.
- Withstand temperatures up to 230 degree F
- Pressure up to 150 psi
- Do not over-tighten
- 2 years warranty against defect
- Nipple
- Brass
This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.
- Withstand temperatures up to 230 degree F
- Pressure up to 150 psi
- Do not over-tighten
- 2 years warranty against defect
- Nipple
- Brass
This pipe fitting is easy to use for both contractors and the do-it-yourself. Ideal for use with copper, brass, iron pipe on oil. Not for underground use.
- Withstand temperatures up to 230 degree F
- Pressure up to 150 psi
- Do not over-tighten
- 2-year warranty against defect
- Lead free
- Brass
Brass compression fitting ensures safety and peace of mind for years to come. It is not recommended for use with steel tubing. Compression fitting is easy to use for both contractors and the do-it-yourself.
- Withstand temperatures up to 212 degree F
- No psi if tighten sleeve
- 2-year warranty against defect
- Compression
- Forged brass
- Nut