Mr. Heater is the Original Tank Top heater. Assembled in Cleveland, Ohio, this radiant 10,000 - 15,000 BTU liquid propane tank top heater is the perfect solution for a variety of outdoor heating applications. This heater is constructed with high quality chrome and stainless steel components to bring you reliable heat on the go. With its adjustable high-medium-low regulator and soft nose P.O.L., the MH15T is easy to use and quick to set up. Its higher grade mesh brings you longer lasting durability while its standard safety shut-off switch brings you peace of mind.

• 10,000 - 15,000 BTU per hour
• For use with propane gas
• Hi-med-low regulator
• Tip-over safety shutoff
• Soft nose P.O.L
• No tool needed, hand wheel installation
• Polished chrome reflector
• Direct connection to 5-20 lb. bulk cylinder
• All components replaceable
• For construction sites, loading docks, sporting events, hunting, fishing, camping

Assembled in Cleveland, Ohio, this radiant 10000 - 30000 BTU Liquid Propane Tank Top heaters are the perfect solution for a variety of outdoor heating applications. This heater is constructed with high quality chrome and stainless-steel components to bring you reliable heat on the go. With its adjustable high-medium-low regulator and soft nose P.O.L., the MH30T is easy to use and quick to set up. Adjustable swivel head design allows you to put heat precisely where you want it. Its higher-grade mesh brings you longer lasting durability, while its standard safety shut-off switch brings you peace of mind.

• 10,000 - 30,000 BTU per hour
• For use with propane gas
• Hi-med-low regulator
• Two tip-over safety shutoff
• Wind resistant screen
• Hi-med-lo regulator
• Cylinder not included
• 8,000/30,000 BTU

The Mr. Heater High-Intensity Radiant OverheadHS8060PPNG Natural Gas Power Pile heater directs radiant heat to floor-level objects, which in turn, heat surrounding air to the desired temperature. Personnel and objects at floor level enjoy instant, cost-saving comfort. Ideal for use in drafty or windy areas like a loading dock or mechanic bays where doors are open during winter conditions. At 99.9% efficiency, it transfers almost all of the fuel it burns directly into clean safe radiant heat. It is equipped with a power pile thermocouple ignition with a manually lit pilot, so no electricity is required. This heater also has a safety shut-off on the pilot and burner and ships with a thermostat. Mr. Heater's high-intensity heaters are protected by a 10-year, pro-rated burner assembly warranty and a limited one-year gas control warranty. Consult the user manual for installation instructions and for clearance to combustible guidance.

• Runs on natural gas
• 60,000 btu
• Great for loading docks, warehouses, factories, farm buildings, repair shops, indoor sports arenas, and entrance ways
• Instant heat with a quiet, clean, odor-free operation
• No direct venting required
• Millivolt power pile control heaters ship with a 24-volt thermostat
• Includes additional orifices to convert to 50,000 btu or 70,000 btu
• Limited 10-year warranty on burner assembly
• Limited 1-year warranty on gas control
• CSA certified

Keep your outdoor space warm and comfortable with the Dyna-Glo 15,000 BTU Portable Radiant Propane Heater. The swiveling burner head and adjustable heat angle provide multiple heat direction options and the safety shutoff valve, tip-over safety switch and nonslip base help ensure safe use. The heater has a compact design and can be easily assembled for your convenience.

• Produces 15,000 BTUs/hour to help keep you warm and comfortable
• Heats a radius of up to 15 ft.
• Swiveling burner head and adjustable heat angle allow for heat in multiple directions
• Manual match-light ignition helps provide a quick and easy startup
• Safety shutoff valve stops gas flow if flame is extinguished
• Tip-over safety switch and non-slip base help give you peace of mind
• Compact design and easy assembly
• Propane tank not included

The Mr. Heater High-Intensity Radiant Overhead HS9100SPPNG Natural Gas Power Pile heater directs radiant heat to floor-level objects, which in turn, heat surrounding air to the desired temperature. Personnel and objects at floor level enjoy instant, cost-saving comfort. Ideal for use in drafty or windy areas like a loading dock or mechanic bays where doors are open during winter conditions. At 99.9% efficiency, it transfers almost all of the fuel it burns directly into clean safe radiant heat. It is equipped with a power pile thermocouple ignition with a manually lit pilot, so no electricity is required. This heater also has a safety shut-off on the pilot and burner and ships with a thermostat. Mr. Heater's high-intensity heaters are protected by a 10-year, pro-rated burner assembly warranty and a limited one-year gas control warranty. Consult the user manual for installation instructions and for clearance to combustible guidance.

• Runs on natural gas
• 100,000 btu
• Great for loading docks, warehouses, factories, farm buildings, repair shops, indoor sports arenas, and entrance ways
• Instant heat with a quiet, clean, odor-free operation
• No direct venting required
• Millivolt power pile control heaters ship with a 24-volt thermostat
• Includes additional orifices to convert to 80,000 btu or 90,000 btu
• Limited 10-year warranty on burner assembly
• Limited 1-year warranty on gas control
• CSA certified

Our Architect Collection offers a metal grill front radiant high efficiency gas luminous heater that is designed and developed with the most modern and rational manufacturing stems. It is lightweight, compact and easy to install. One of the main advantages of this heater, whose radiant body is composed of ceramic plates, is that it applies the physical principles of radiance to heat only desired zones, avoiding waste of energy.

• Runs on propane or natural gas
• Highly efficient and quiet radiant heat
• Compact minimal design
• No air movement
• Limited 1-year warranty on gas control
• CSA certified

Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort. This 60,000 BTU burner box goes with the Heatstar ERXL 20 ft. Tube System, and comes ready for propane (LP). All components are name-brand and non-proprietary. This heater must be vented in accordance with the specifications contained in its manual and with national codes and any state, provincial or local codes which may apply. Warning: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment. For assistance or additional information consult a qualified installer, service agency, or gas supplier.

• For use with the Heatstar ERXL 20 ft. tube system
• Great for warehouses, repair shops, truck terminals, aircraft hangers, loading docks, sporting arenas, and farm buildings
• Sealed burner box control with underside sight glass
• 24-Volt thermostat, and 90 degree elbow or 180 U bend tubes also available
• 10 year warranty (Limited to 2 years in caustic environments, such as car washes)
• CSA approved

Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort. This 80,000 BTU burner box goes with the Heatstar ERXL 30 ft. Tube System, and comes ready for propane (LP). All components are name-brand and non-proprietary. This heater must be vented in accordance with the specifications contained in its manual and with national codes and any state, provincial or local codes which may apply. Warning: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment. For assistance or additional information consult a qualified installer, service agency, or gas supplier.

• For use with the Heatstar ERXL 30 ft. tube system
• Great for warehouses, repair shops, truck terminals, aircraft hangers, loading docks, sporting arenas, and farm buildings
• Sealed burner box control with underside sight glass
• 24-Volt thermostat, and 90 degree elbow or 180 U bend tubes also available
• 10 year warranty (Limited to 2 years in caustic environments, such as car washes)
• CSA approved

Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort. This 100,000 BTU burner box goes with the Heatstar ERXL 30 ft. or 40 ft. Tube System, and comes ready for propane (LP). All components are name-brand and non-proprietary. This heater must be vented in accordance with the specifications contained in its manual and with national codes and any state, provincial or local codes which may apply. Warning: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment. For assistance or additional information consult a qualified installer, service agency, or gas supplier.

• For use with the Heatstar ERXL 30 ft. or 40 ft. tube system
• Great for warehouses, repair shops, truck terminals, aircraft hangers, loading docks, sporting arenas, and farm buildings
• Sealed burner box control with underside sight glass
• 24-Volt thermostat, and 90 degree elbow or 180 U bend tubes also available
• 10 year warranty (Limited to 2 years in caustic environments, such as car washes)
• CSA approved

The HEATSTAR High Intensity Radiant Overhead 4040 Natural Gas heaters direct line of site radiant heat to floor-level objects, which in turn, heat surrounding air to the desired temperature. They are ideal for use in drafty or windy areas like a loading dock or auto mechanic bays where doors are open during winter conditions. Has a spark ignition system with a safety shut-off on the pilot and burner and ships with a 40VA transformer.

• Great for loading docks, warehouses, factories, farm buildings, repair shops, indoor sport arenas, and entrance ways
• Includes additional orifices to convert to 30,000 BTU
• Includes a 40VA transformer
• No direct venting required
• Easy to install and maintenance free
• Made from corrosion resistant materials
• Limited 1-year warranty on gas control, pro-rated 10-year warranty on burner assembly
• CSA certified

Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort. This 80,000 BTU burner box goes with the Heatstar ERXL 30 ft. Tube System, and comes ready for natural gas (NG), and includes a propane (LP) conversion kit. All components are name-brand and non-proprietary. This heater must be vented in accordance with the specifications contained in its manual and with national codes and any state, provincial or local codes which may apply. Warning: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment. For assistance or additional information consult a qualified installer, service agency, or gas supplier.

• For use with the Heatstar ERXL 30 ft. tube system
• Great for warehouses, repair shops, truck terminals, aircraft hangers, loading docks, sporting arenas, and farm buildings
• Sealed burner box control with underside sight glass
• 24-Volt thermostat, and 90 degree elbow or 180 U bend tubes also available
• 10 year warranty (Limited to 2 years in caustic environments, such as car washes)
• CSA approved

Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort. This 10 ft. Tube System goes with the Heatstar ERXL 40,000 BTU burner box. All components are name-brand and non-proprietary. This heater must be vented in accordance with the specifications contained in its manual and with national codes and any state, provincial or local codes which may apply. WARNING: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment. For assistance or additional information consult a qualified installer, service agency, or gas supplier.

• For use with the Heatstar ERXL 40,000 BTU burner box
• Set includes: aluminized steel tubes, polished aluminum reflectors, chrome plated hangers, vent adapter and turbulator
• 10 year warranty (limited to 2 years in caustic environments, such as car washes)
• Reflectors can be installed horizontally or at a 45 degree angle
• CSA approved
• Optional 24-Volt thermostat available

The HEATSTAR High Intensity Radiant Overhead 9100S Propane heaters direct line of site radiant heat to floor-level objects, which in turn, heat surrounding air to the desired temperature. They are ideal for use in drafty or windy areas like a loading dock or auto mechanic bays where doors are open during winter conditions. Has a spark ignition system with a safety shut-off on the pilot and burner and ships with a 40VA transformer.

• Great for garages, workshops, barns, sheds, loading docks, animal pens, and entrance ways/ramps for snow prevention
• Heats up to 500-600 sq. ft., which equals an average 2.5 car garage
• Includes a 40VA transformer
• Can be used with a 24-Volt thermostat
• Easy to install and maintenance free
• Limited 1 year warranty on gas control, limited 5 year warranty on burner assembly
• CSA certified
• No moving parts to service
• Non-corrosive materials used throughout construction

Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort. This 125,000 -175,000 BTU burner box goes with the Heatstar ERXL/ER2STG 50 ft. or 60 ft. Tube System, and comes ready for propane (LP). All components are name-brand and non-proprietary. This heater must be vented in accordance with the specifications contained in its manual and with national codes and any state, provincial or local codes which may apply. Warning: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment. For assistance or additional information consult a qualified installer, service agency, or gas supplier.

• Low stage is 125,000 BTU; high stage is 175,000 BTU
• For use with the Heatstar ERXL/ER2STG 50 ft. or 60 ft. tube system
• Great for warehouses, repair shops, truck terminals, aircraft hangers, loading docks, sporting arenas, and farm buildings
• Sealed burner box control with underside sight glass
• 24-Volt thermostat, and 90 degree elbow or 180 U bend tubes also available
• 10 year warranty (Limited to 2 years in caustic environments, such as car washes)
• CSA approved

Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort. This 125,000 -175,000 BTU burner box goes with the Heatstar ERXL/ER2STG 50 ft. or 60 ft. Tube System, and comes ready for natural gas (NG), and includes a propane (LP) conversion kit. All components are name-brand and non-proprietary. This heater must be vented in accordance with the specifications contained in its manual and with national codes and any state, provincial or local codes which may apply. Warning: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment. For assistance or additional information consult a qualified installer, service agency, or gas supplier.

• Low stage is 125,000 BTU; high stage is 175,000 BTU
• For use with the Heatstar ERXL/ER2STG 50 ft. or 60 ft. tube system
• Great for warehouses, repair shops, truck terminals, aircraft hangers, loading docks, sporting arenas, and farm buildings
• Sealed burner box control with underside sight glass
• 24-Volt thermostat, and 90 degree elbow or 180 U bend tubes also available
• 10 year warranty (Limited to 2 years in caustic environments, such as car washes)
• CSA approved

Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort. This 175,000 BTU burner box goes with the Heatstar ERXL 50 ft. or 60 ft. Tube System, and comes ready for natural gas (NG), and includes a propane (LP) conversion kit. All components are name-brand and non-proprietary. This heater must be vented in accordance with the specifications contained in its manual and with national codes and any state, provincial or local codes which may apply. Warning: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment. For assistance or additional information consult a qualified installer, service agency, or gas supplier.

• For use with the Heatstar ERXL 50 ft. or 60 ft. tube system
• Great for warehouses, repair shops, truck terminals, aircraft hangers, loading docks, sporting arenas, and farm buildings
• Sealed burner box control with underside sight glass
• 24-Volt thermostat, and 90 degree elbow or 180 U bend tubes also available
• 10 year warranty (Limited to 2 years in caustic environments, such as car washes)
• CSA approved

The isolation valve kit come with both valves inside the box. Also included is the pressure relief valve. All valves are lead free.

• Includes hanging brackets and transformer
• No direct venting required
• Pressure relive valve included
• 3 in. Dia
• 3/4 in.

Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort. This 40,000 BTU burner box goes with the Heatstar ERXL 10 ft. Tube System, and comes ready for propane (LP). All components are name-brand and non-proprietary.

• For use with the Heatstar ERXL 10 ft. tube system
• Great for warehouses, repair shops, truck terminals, aircraft hangers, loading docks, sporting arenas, and farm buildings
• Sealed burner box control with underside sight glass
• 24-Volt thermostat, and 90 degree elbow or 180 U bend tubes also available
• 10 year warranty (Limited to 2 years in caustic environments, such as car washes)
• CSA approved

Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort. This 100,000 BTU burner box goes with the Heatstar ERXL 30 ft. or 40 ft. Tube System, and comes ready for natural gas (NG), and includes a propane (LP) conversion kit. All components are name-brand and non-proprietary. This heater must be vented in accordance with the specifications contained in its manual and with national codes and any state, provincial or local codes which may apply. Warning: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment. For assistance or additional information consult a qualified installer, service agency, or gas supplier.

• For use with the Heatstar ERXL 30 ft. or 40 ft. tube system
• Great for warehouses, repair shops, truck terminals, aircraft hangers, loading docks, sporting arenas, and farm buildings
• Sealed burner box control with underside sight glass
• 24-Volt thermostat, and 90 degree elbow or 180 U bend tubes also available
• 10 year warranty (Limited to 2 years in caustic environments, such as car washes)
• CSA approved

Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort. This 60 ft. Tube System goes with the Heatstar ERXL 150,000 or 175,000 BTU burner box, or the Heatstar ER2STG125,000-175,000 BTU burner box. All components are name-brand and non-proprietary. This heater must be vented in accordance with the specifications contained in its manual and with national codes and any state, provincial or local codes which may apply. Warning: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment. For assistance or additional information consult a qualified installer, service agency, or gas supplier.

• For use with the Heatstar ERXL 150,000 or 175,000 BTU burner box or the Heatstar ER2STG 125,000-175,000 BTU burner box
• Great for warehouses, repair shops, truck terminals, aircraft hangers, loading docks, sporting arenas, and farm buildings
• Set includes: aluminized steel tubes, polished aluminum reflectors, chrome plated hangers, stainless steel couplers and keys, vent adapter and turbulator
• Reflectors can be installed horizontally or at a 45 degree angle
• 24-Volt thermostat, and 90 degree elbow or 180 U bend tubes also available
• 10 year warranty (limited to 2 years in caustic environments, such as car washes)
• CSA approved

Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort. This 30 ft. Tube System goes with the Heatstar ERXL 80,000 BTU burner box. All components are name-brand and non-proprietary. This heater must be vented in accordance with the specifications contained in its manual and with national codes and any state, provincial or local codes which may apply. WARNING: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment. For assistance or additional information consult a qualified installer, service agency, or gas supplier.

• For use with the Heatstar ERXL 80,000 BTU burner box
• Great for warehouses, repair shops, truck terminals, aircraft hangers, loading docks, sporting arenas, and farm buildings
• Set includes: aluminized steel tubes, polished aluminum reflectors, chrome plated hangers, stainless steel couplers and keys, vent adapter and turbulator
• Reflectors can be installed horizontally or at a 45 degree angle
• 24-Volt thermostat, and 90 degree elbow or 180 U bend tubes also available
• 10 year warranty (limited to 2 years in caustic environments, such as car washes)
• CSA approved

Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort. This 150,000 BTU burner box goes with the Heatstar ERXL 50 ft. or 60 ft. Tube System, and comes ready for propane (LP). All components are name-brand and non-proprietary. This heater must be vented in accordance with the specifications contained in its manual and with national codes and any state, provincial or local codes which may apply. Warning: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment. For assistance or additional information consult a qualified installer, service agency, or gas supplier.

• For use with the Heatstar ERXL 50 ft. or 60 ft. tube system
• Great for warehouses, repair shops, truck terminals, aircraft hangers, loading docks, sporting arenas, and farm buildings
• Sealed burner box control with underside sight glass
• 24-Volt thermostat, and 90 degree elbow or 180 U bend tubes also available
• 10 year warranty (Limited to 2 years in caustic environments, such as car washes)
• CSA approved

Heatstar low-intensity infrared tube heaters direct line-of-site radiant heat to floor-level objects, which in turn, heats surrounding air to desired temperature. Personnel and objects at floor-level enjoy instant, cost-saving comfort. This 60,000 -100,000 BTU burner box goes with the Heatstar ERXL/ER2STG 30 ft. Tube System, and comes ready for propane (LP). All components are name-brand and non-proprietary. This heater must be vented in accordance with the specifications contained in its manual and with national codes and any state, provincial or local codes which may apply. Warning: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment. For assistance or additional information consult a qualified installer, service agency, or gas supplier.

• Heatstar low intensity radiant tube heaters direct line-of-sight radiant heat to floor-level objects, which in turn, heat surrounding air to desired temperature
• Low stage is 60,000 BTU; high stage is 100,000 BTU
• For use with the Heatstar ERXL/ER2STG 30 ft. tube system
• Great for warehouses, repair shops, truck terminals, aircraft hangers, loading docks, sporting arenas, and farm buildings
• Sealed burner box control with underside sight glass
• 24-Volt thermostat, and 90
• 10 year warranty (limited to 2 years in caustic environments, such as car washes)
• CSA approved

The Mr. Heater High-Intensity Radiant Overhead HS9100SSPLP Liquid Propane Auto Spark Ignition heater directs radiant heat to floor-level objects, which in turn, heat surrounding air to the desired temperature. Personnel and objects at floor level enjoy instant, cost-saving comfort. Ideal for use in drafty or windy areas like a loading dock or mechanic bays where doors are open during winter conditions. At 99.9% efficiency, it transfers almost all of the fuel it burns directly into clean safe radiant heat. It is equipped with an auto-spark ignition system, a safety shut-off on the pilot and burner, and ships with a 120V/24VAC/40VA transfomer. Mr. Heater's high-intensity heaters are protected by a 10-year, pro-rated burner assembly warranty and a limited one-year gas control warranty. Consult the user manual for installation instructions and for clearance to combustible guidance.

• Runs on liquid propane
• 100,000 btu
• Great for loading docks, warehouses, factories, farm buildings, repair shops, indoor sports arenas, and entrance ways
• Instant heat with a quiet, clean, odor-free operation
• No direct venting required
• Built-in automatic spark ignition with a safety burner shutoff, 24-volt ac control with intermittent pilot
• Transformer 120-volt/24-volt shipped loose with heater
• Includes additional orifices to convert to 80,000 btu or 90,000 btu
• Limited 10-year warranty on burner assembly
• Limited 1-year warranty on gas control
• CSA certified