Sensor Product Repair
SLOAN G2 OPTIMA Plus EBV-136-A Solenoid assembly. Our products perform at their highest levels when maintained exclusively using SLOAN Genuine Parts. We offer the largest selection of parts, manufactured and tested to SLOAN specifications. Best-in-class parts, specifically designed for the most reliable commercial restroom products, means fewer repairs, protecting your investments.
- Solenoid assembly
- G2 modules only
- EBV-136-A
- SLOAN OEM parts
Sloan G2 OPTIMA Plus Ebv-120-A-C Electronic Sensor Module
H-1006-A stop repair kit.
- H-1006-A control stop repair kit
- Includes 1 in. concealed wheel handle
- For use with 1 in. H-700-A, H-600-A and H-543-AWH WH series stops
- All required hardware including set spring and screw included
The ETF-370-A is a 24 VAC Solenoid Assembly. This assembly includes an 18 in. (457 mm) armored cable and two (2) Terminal Housings. The ETF-370-A is used on SLoan ETF-610 & ETF-600 Sensor Operated Faucets.
- Used on hardwired Faucets
- Brass construction
- For Sloan sensor facuets
- Readily available
Sloan G2 OPTIMA Plus EBV-129-A-U Electronic Sensor Module
Sloan Etf-1009-A Solenoid Valve Repair Kit 3305577
- Solenoid valve repair kit for optima series sensor faucets
- Repair kit is also compatible with the Sloanstone EW-4200 lavatory sink
- Kit includes replacement filter, guide, armature spring, diaphragm and washer
- Compatible with optima series ETF and ELF series units
The EBV-146-A is the Electronic module and solenoid replacement for top mount battery Sloan Flushometers. The EBV-146-A comes with 4 AA Alkaline Duracell batteries factory installed. This product also houses the sensor eye inside the module.
- Used on G2 series flushometers
- Uses 4 AA batteries
- Plastic construction
- Has sensor
Sloan Faucet/Sensor Assembly For Ebf-85
- Faucet assembly only
Sensor Replacement Kit
- Used on ES_S series Urinal Flushoemters
- Black Plastic
- does not include sensor plate
- readily available
- ETF-740-A
- For battery faucets with existing gray control module
- Made of high-quality materials for durability
- Designed for battery faucets with an existing gray control module
- Features armored cable and wire
- Solenoid valve turns air and water on and off according to the level of resistance in the control circuit
Repair of flush valve components, rather than replacement of the entire unit, saves money and resources. Zurn's replacement actuator assembly (Part no. PEMS6000-HYM-IS) is designed for ZEMS integral sensor flush valves. ZEMS hardwired flush valves provide consistent and reliable motorized operation, detecting the user with precision for high-performance flushing operation. They feature a quiet GO BLUE diaphragm with a clog-resistant bypass and chloramine-resistant seals for an extended lifespan and lower maintenance costs. When you need a replacement part for repair or maintenance of a flush valve, trust Zurn for genuine, reliable parts.
- Fits ZEMS integral sensor flush valve
- Includes flush actuator, wrench, O-ring and escutcheon
- ZEMS flush valves are hardwired for reliable hands-free operation
- Robust solution for replacement or repair
- Ideal for commercial applications
- Easy to install
Solenoid Valve Cartridge for the i.q. Faucet EAF-2.
The dual patented filter rings on the Dual Filtered Diaphragm prevent sediment from reaching the bypass. This results in clog-free operation, eases valve maintenance, and reduces water usage. The Dual Filtered Diaphragm is factory assembled
Sensor Assembly Battery without i.q.-cliq. EAF-3-A.
- Accommodates 100 blades and ensures easy dispensing
- Aluminum back for maximum strength and durability
- Single-edge blade ideal for flooring, painting general use, and more
- Ergonomic design allows for convenient use
OPTIMA G2 complete cover, ring, sensor, assembly.
- COVER
- RING
- SENSOR
- ASSEMBLY
EL-138-2 24 VAC Solenoid Assembly, Concealed Installation Includes Handle Coupling, 24 VAC Coil, Face Plate For 24 VAC Solenoid, Solenoid Adapter, Solenoid Shaft Assembly, Nut for Solenoid, Solenoid Base Plate and Solenoid Cover Assembly
- Solenoid Assembly
- Concealed Installation
- Includes Handle Coupling
- 24 VAC Coil
OPTIMA Bathroom Commercial Flushometer Replacement Part EL-124-2 CP Solenoid Assembly 24V
- Made from premium-quality materials for durability
- Designed for exposed installation
- Includes handle coupling, 24 VAC coil, faceplate, nut, adapter, shaft assembly, housing, flux plate, and O-ring
- Designed to ensure optimum functioning
- 4" Cover plate with locating pin & hardware
If you are looking to find your Bradley repair parts quickly and easily, we have you covered. This Bradley 118-237 individual valve body is a genuine replacement part manufactured by Bradley. Order this Bradley 118-237 today and you will have your Bradley fixture up and running in no time.
- Genuine Bradley replacement part
- Diameter: 1.88 in., height: 1.00 in.
- Includes valve body
- Replacement part for Bradley sentry washfountain
- Replacement part for Bradley multi-founts
- C-certified lead free per NSF 372
A universal kit that replace many of the most popular direct OEM solenoid valves. Each kit includes solenoid valve, mounting bracket and all fittings to replace existing valve. Will not replace solenoids with internal metering orifices.
- Easy in; wrench-in installation
- Time saving
- Universal replacement reduces inventory
- Economically priced compared to OEM versions
Replacement Commercial service kit. Tips For Removal Of Old Faucet: Always turn water supply OFF before removing existing faucet or disassembling the valve. Open faucet handle to relieve water pressure and ensure that complete water shut-off has been accomplished. CARE instructions To preserve the finish on the metallic parts of your MOEN faucet, apply non-abrasive wax, such as car wax. Any cleaners should be rinsed off immediately. Mild abrasives are acceptable on Platinum and LifeShine finishes.
- Replacement commercial AC tube and escutcheon
- Authentic MOEN replacement part
- Designed for hassle-free installation
- Ideal for repairing problematic plumbing fixtures without the need to replace them
- 5 year limited warranty
- AC tube and escutcheon
From leaks and vandalism to normal wear and tear, worries never cease where commercial and institutional fixtures are concerned. That's why MOEN Commercial engineers and designers think of every imaginable scenario and plan for it in advance. The result is a full line of faucets and valves every facilities manager can rely on from MOEN. Our products will help you reduce maintenance costs resist vandalism save water while maintaining performance cut your total cost of ownership We welcome you to discover all the reasons you can count on MOEN Commercial to provide the best solutions for your most challenging environments.
- 5-year limited warranty
- Vandal resistant
- Designed for easy installation
- Chrome finish is highly reflective for a mirror-like look that works with any decorating style
- MOEN commercial products are heavier than our residential products and made from superior components
- You can count on MOEN commercial for support and customer service